MeshWorks
	MeshWorks is an advanced mesh editing software built using the powerful MeshLib mesh library. With MeshWorks you can create, transform and modify meshes very easily. A mesh is usually created by exporting a solid model from another CAD system. Meshes created this way are very difficult to modify and sometimes the very nature of their geometry renders them useless for further processing. MeshWorks gives you the power to manipulate meshes so that you can alter their geometry and make them suitable to your needs. Company: Floating Point Solutions Private Limited  Date Released: 15-08-2003  Program Size: 1200 KB License: Shareware Platform: Win95,Win98,WinME,WinNT 4.x,WinXP,Windows2000
	-

	MeshWorks for Rhino
	MeshWorks for Rhino is a plug-in for Rhino. It adds a variety of mesh manipulation commands to Rhino. Some of the useful commands are given below: Hollow: This command hollows the mesh to a given wall thickness. Hollowing is particularly useful while preparing a model for Rapid Prototyping as it saves material, time and money while building a prototype. Offset: This command offsets a mesh to either shrink or expand it. PointsToMesh: This command creates a mesh from a set of points. Stitch: This command knits loosely tied faces of a mesh and attempts to make a mesh water-tight. FillHoles: This command adds faces to an existing mesh in order to fill any holes. The result is a water-tight mesh. ExtractSolid: This command extracts a solid from a mesh. ExtractPlanarSurfaces: This command extracts a planar trimmed NURBS surface from a mesh. ExtractShells: This command extracts connected surfaces from a single mesh and creates a new mesh for each connected surface. This is useful while working on different parts of a mesh. ExtractSurfaces: This command extracts surfaces of a mesh and creates a new mesh for each surface. ExtractFeatures: This command extracts features of a mesh. This is useful to create a NURBS model from a polygon mesh. ExtractBoundaries: This command extracts the boundaries of an open mesh. SplitMesh: This command splits a mesh with a planar surface into two parts. Smoothen: This command relaxes a mesh by removing sharp edges. Decimate: This command reduces the number of faces of a mesh while maintaining continuity in the topology. MeshWorks for Rhino adds a new menu to the existing Rhino menu containing all the added commands. Simply use this menu to manipulate meshes. Company: Floating Point Solutions Private Limited  Date Released: 01-04-2002  Program Size: 3 KB License: Shareware Platform: Win95,Win98,WinME,WinNT 4.x,WinXP,Windows2000
	-

| 1 |